Spray Equipment - Mobile Spray Rigs
SPRAY EQUIPMENT - MOBILE SPRAY RIGS
Our staff is focused on catering to your needs
through all phases of any plural component spray project. SprayfoamUSA’s
experts have years of experience in spray foam roofing, sprayfoam insulation,
specialty coatings, and spray polyurea applications.
When applying your Spray Foam or Polyurea products, the selection and
utilization of proper equipment is important to the success of
your project. Please review the Product Data Sheet of the product
you are applying for specific application instructions.
Four Steps to Consider When Designing Your Spray Foam System...
|
|
STEP 1 |
Proportioners |
|
Choose from several models: Single Phase or 3-phase electric, air or hydraulic motors.
Key Features:
- Portable units for job site flexibility
- Quick knock down fluid sections
- Optional data reporting capabilities
- Foam models rated at 2000 psi (138 bar, 13.8MPa)
- Polyurea models rated up to 3500 psi (241 bar, 24.1 MPa) |
|
|
STEP 2 |
Heated and Whip Hoses |
|
Heated Hose: Choose from pressure ratings of 2000 psi or 3500 psi (138 to 241 bar, 13.8 to 24.1 MPa)
Heated Whip Hose: Choose from pressure ratings of 2000 psi or 3500 psi (138 to 241 bar, 13.8 to 24.1 MPa) |
|
|
STEP 3 |
Spray Guns |
|
Choose from air mechanical purge with a round or flat pattern. Both models rated at 3500 psi (241 bar, 24.1 MPa)
Air Purge Gun Key Features:
- Easiest gun to use on the market
- Clean up in seconds
- Longer life components
Mechanical Purge Gun Key Features:
- Best mix on the market
- Smoother finish for low output applications |
|
|
STEP 4 |
Material Supply - Transfer Pumps |
|
Supply Pump - choose from diaphragm or piston pumps for standard materials or wall mount. Select a 2:1 piston pump for materials with higher viscosities.
Agitator Kits - choose a kit to agitate your materials for the materials you use. Consult your technical data sheet for each specific product. |
![]()
H-40/H-XP3
 Powerful 20kW hybrid heater design provides more efficient heat transfer to the A and B materials
Revolutionary new electronic platform – Circuit board is divided into easy-to-replace modules that simplify troubleshooting and maintenance, and reduce downtime
Provides pressure and temperature control for accuracy in spraying
Reactor H-40 sprays up to 45 lbs/min (20 kg/min)
Reactor H-XP3 sprays up to 2.8 gpm (10.6 lpm)
![]()
 Reactor
( H-25 and H-XP2)
Entry-Level Hydraulic Proportioners for Spraying
Foam and Polyurea
The first hybrid Graco|Gusmer units on the market!
Graco's
Reactor H-25 and H-XP2 are lightweight, easy-to-use hydraulic
units that combine the horizontal Gusmer pump line and Graco technology,
including digital controls and system diagnostics. These sprayers
are ideal for plural-component polyurethane spray foam, tank and
pipe coating, in-plant OEM, adhesives and caulk, rim and band
joist applications. Reactor H-25 and H-XP2...reliable performance
and industry-proven technology from Graco|Gusmer.
- High
performance, horizontal pumping system
- Lightweight
yet durable hydraulic system featuring a five-quart reservoir
- 170 pounds lighter than the standard 25-gallon reservoir!
- Softstart
technology uses 1/3 less amp draw than a standard starter, so
you can use a smaller generator and also reduce wear and extend
your generator life
- Hybrid
heater design gives you up to 15,300 watts of heat to pre-heat
material quickly
- Programmable
standby mode shuts the motor and hydraulic pump down after a
period of inactivity to prevent overheating
- Remote
mountable controls are fully digital and easy to use
- New
lightweight hydraulics are only a fraction of standard hydraulic
units
- Reliable
horizontal pump allows you to spray longer
- High
output heaters with maximum temperatures of up to 15,300 watts
- Optional
data reporting keeps better records by monitoring and tracking
material usage
- New
troubleshooting Y-strainer-pressure and temperature gauges are
standard on every unit
- User-defined
controls allow you to program settings for standby mode and
pressure imbalance detection
![]()
If
you have any additional questions concerning the correct equipment
for your application, please contact our technical support team
and we will be pleased to answer your specific questions.
For more information... Call Today! (877) 836-2648 |
